The MUSCLE MAN!
Demanding applications are the job of the KFS 850.
With plenty of power, the KFS 850 impresses when it comes to clearing snow from the front, removing edge walls and loading snow.
KFS 850 | spinner | 1600 | 2300 | 2500 | 2700 | |
|---|---|---|---|---|---|
| Clearing width | [mm] | 1600 | 2300 | 2500 | 2700 |
| Milling drum diameter | [mm] | 850 | 850 | 850 | 850 |
| Blast wheel diameter | [mm] | 830 | 830 | 830 | 830 |
| Clearing height up to approx. | [mm] | 1200 | 1200 | 1200 | 1200 |
| Throw range up to approx. | [m] | 30 | 30 | 30 | 30 |
| Weight with device plate approx. | [kg]* | – | 1060 | 1110 | 1160 |
| Weight 3-pt. approx. | [kg]* | 740 | 1000 | 1050 | 1100 |
Automatic overload protection
- Overload protection of the spiral cutters via a wear-free CAM-type clutch built into the axle gear On disengagement the blower continues to run resulting in elimination of any chute blockage, minimum lost time, optimized protection against damage and automatic start-up when reengaging the cutter drive.
- Additionally the blower is further protected by an easily accessible shear pin
Open clearing system
- The „open“ clearing system guarantees trouble-free removal of any type of snow, from slush to frozen
Precise synchronization
- Precise synchronization between the blower and spiral cutter speeds permits large throwing distances with maximum utilization of
- The drive is provided by the PTO of the service vehicle or by a hydraulic power
Wear plate
- An exchangeable wear insert in the blower housing prevents wear from stones and chippings, particularly in community and rural
- Easy to change, this saves excessive
Hydraulic lateral tilting gear (optional)
- A hydraulic transverse tilt mechanism allows adjustment of the cutter/blower to the road surface
Snow discharge chutes
- Swiveling chute mounted on a ball-bearing steering ring. Slewing range approx. 210 degrees, continuous hydraulic
- A selection of discharge chutes and hydraulically adjustable flaps allow discharging the snow to the desired location in any
Mounting
- Specially suited for attachment to tractors, communal- and special- (narrow gauge) vehicles as well as compact wheel loaders from approx. 90 HP (66 kW) to approx. 180 HP (132 kW).
Mounting options
- Vehicle-quick-release-plate with equipment-mounted lifting device
- Device plate with vehicle-mounted lifting device