The flail Gang Mower model TRIFLEX is a machine with a wide cutting width of 420 or 500 cm.
This model has an innovative double-jointed system, made of 3 independent flail decks, that allows mowing on any uneven ground without damaging the turf making it unique among the 3-unit horizontal cutting machines.
The cutting height is adjusted, millimetrically, on each machine by the rear roller and on the side shredders by the front wheels.
Various models of knives are available depending on the intended use, such as “Y” knives for mulching on public parks, light delta knives for sports surfaces or heavy hammers for rough areas with pruning up to 3 cm in diameter and verticut knives for aerating & regenerating turf.
The gang flail mower model TRIFLEX performs mulching cut and uniform grass distribution on each pass. Robust hydraulic cylinders lift mowing decks up to a total width of 225 cm for transport in complete safety.
This machine is used for cutting large public or sports areas such as by Airports, Golf Courses or large grass surfaces for fast maintenance where grass must be quickly absorbed from the ground.
The flail mower model TRIFLEX has got a special PATENTED electro -hydraulic accessory that can be installed on request, used by public amenities personnel, which allows the lateral decks to be lifted and automatically block the flail shaft in 3 seconds so as to
overcome any obstacles present during cutting in complete safety and in a fast way.
Rear Mounted Deck.
- Flexible & Anti-scalping Motion.
The cutting height of each deck is controlled by a full width rear roller and a single front castor wheel.
Hydraulic rams allow the heads to be lifted from the ground and folded into a transport with of 2.25 metres for safe road transport.